Mine equipment
Showing
41 - 60
of 107
, query time: 0.01s
Format:
Image
The lathes were for working steel. They could straighten bent drill steel, put new ends on the rods and send them back for reuse. The Gilman shop reused as much equipment and supplies as was possible.
Format:
Image
Lead flotation cell separating the lead from the crushed rock. Lead and gold were removed from the muck before the zinc was separated.
Format:
Image
Front: "timber yard 'Hound' on duty; verso: "Gilman on Little Chief Mine dump, Fraysur [Froysur, Frasier?] in picture
Format:
Image
John F. Mignone, Jr., and Clyde Spurr installing a motor in an Eimco Finlay Loader. The loader will be repaired, cleaned and returned to the mine in first class operating condition, with the least possible loss of time from service.
46) Loading tipple
Format:
Image
The loading tipple is at far left where products would be transferred to railroad cars for shipment. The "Bull Gang" managed loading and maintenance in the Eagle River canyon. Robert E. Riggle was Bull Gang chief at one point.
The stairway at center goes into a mine entrance at about the 17 level. There are 80 feet between levels in the Gilman mine.
Format:
Image
Lee Ferris lubricating a bearing on the main cage at the Gilman Mine.
The safety manager was a very important part of the mining team. Safety was stressed constantly through regular meetings and signs placed throughout the mine.
Format:
Image
Quinton Sagrillo or Frank Jones or Mike Chockie lubricating part of the zinc dryer at Belden.
49) Machine Shop
Format:
Image
Bob Enzenroth in the machine shop at the Gilman Mine repairing and overhauling a jackhammer.
Format:
Image
The main shaft at the Gilman Mine with Mayo Lanning, mine chief, inspecting.
51) Mill
Format:
Image
The mill building at Holy Cross City.
Gold Park and Holy Cross City were the major mining camps in the Holy Cross Mining District.
"Apparently, there were two mills at Holy Cross City. The first, located just below the town, on the west side of the road, was called simply the Holy Cross Mill. It was owned by the Gold Park Mining and Milling Co. which also maintained a similar installation down below. ... Both mills were connected by a direct 2...
Format:
Image
Gold Park and Holy Cross City were the major mining camps in the Holy Cross Mining District. Man with shovel at center foreground.
"Apparently, there were two mills at Holy Cross City. The first, located just below the town, on the west side of the road, was called simply the Holy Cross Mill. It was owned by the Gold Park Mining and Milling Co. which also maintained a similar installation down below. ... Both mills were connected by a direct 2...
Format:
Image
Gold Park and Holy Cross City were the major mining camps in the Holy Cross Mining District.
"Apparently, there were two mills at Holy Cross City. The first, located just below the town, on the west side of the road, was called simply the Holy Cross Mill. It was owned by the Gold Park Mining and Milling Co. which also maintained a similar installation down below. ... Both mills were connected by a direct 2 1/2 mile long flume that bypassed the...
Format:
Image
Remains of the mill and adjacent structures at Holy Cross City, which is ten miles south of Minturn or eleven miles north of Tennessee Pass. By the time this photo was taken, Fleming Lumber Co. had removed the main steam engine and one of the boilers from the mill to use in a saw mill. [Courtesy of Ted Beck]
55) Mine stope
Format:
Image
Mine stope showing the reinforcing timbers used. On the left side of the picture is a thermometer used to monitor temperatures.
Format:
Image
Moving a dryer section into place by blocking and chaining. Small sections pf pipe were also used to move the dryer.
Format:
Image
Section of the zinc dryer being fitted into place at Belden. Chains and blocks are used to move the equipment into the building.
58) Mucking machine
Format:
Image
Air operated mucking machine. The scoop goes over the mucking machine and empties the ore into the car behind. Miners also used these cars to move mining timbers throughout the mine.
59) Mucking machine
Format:
Image
Mucking machine picking up a load of ore at Gilman. The machine ran on rails and pulled ore cars behind for loading.
60) Mucking machine
Format:
Image
Air operated mucking machine preparing to load material. The scoop would go over the mucking machine and empty the ore into the cart behind. Operator controls were at the left side of the machine.
