Showing
41 - 60
of 121
, query time: 0.01s
Format:
Image
Gilman power plant under renovation. The house in the immediate left background is where the Enzenroth family lived. Directly behind and to the left of the Enzenroth house is the Hess house. The Schlegel house is to the right of the Hess house. The school fence is visible at upper right.
Format:
Image
The town of Gilman showing the main shaft down into the mine in the left center of the picture. Mining timbers are stacked in the yard to the immediate right of the main shaft. Highway 24 is on the far left going toward Red Cliff.
43) Gilman stope
Format:
Image
A mine "stope" at the Gilman Mine. A stope is an opening made so the ore can be mined. Timbers are used to support walls and overhead for safe mining operations.
44) Incline hoist
Format:
Image
W.C. "Bill" May, at left,from the electrical shop, and O.A. McClain, from the machine shop, discussing the general reconstruction of an incline hoist to be used in the mine. This entire hoist except for the drum and bull wheel is being reconstructed in the shop.
Format:
Image
Inserting dynamite into a drill hole prior to blasting at Gilman.
Format:
Image
Installing transformers and connecting terminals to main power line.
Format:
Image
Moving transformers into place at Gilman. The power plant was located near Hwy 24 and was on the southeast edge of Gilman, above the town.
49) Jack Johnson
Format:
Image
Jack Johnson, surveyor, checking calculations at his desk. Survey crews worked both in the Gilman Mine and at Belden, as well as on the general property of New Jersey Zinc, Gilman.
Format:
Image
Joel Fitzgerald, shop foreman, boring a bearing for an electric motor which operates Marcy Mill in the Milling Department.
51) John Coulthard
Format:
Image
John Coulthard of the engineering department at the Gilman Mine office. An engineering calculator is to his right. As calculations were performed, the top of the calculator "traveled" until final solutions were computed.
Format:
Image
H. Lee Ferris is shown oiling, checking and adjusting landing chairs at #1 shaft. These landing chairs are safety devices that fall into a blocking postion under the floor of the cage when it reaches the top of the shaft. These devices are on the sides of the shaft and prevent the cage from descending into the shaft until such time as the landing chairs are released manually. Mr. Ferris is standing in the cage which has been lowered to a point...
Format:
Image
The Hart mining Camp, "Poverty Flats," east of Gilman, Colorado, and just below Bell's Camp on Battle Mountain. A group of adults appear to be playing tennis while children in the background are swinging. Two children are sitting on a pony at far right. At far left, people are seated under a shelter. Buildings are visible in the background.
From left to right: Ben Hart, 2. Jodi Beverly, 3. Albert Kuhn, 4. Mary McCormick, 5. not known, 6. Susan...
Format:
Image
Lead flotation cell separating the lead from the crushed rock. Lead and gold were removed from the muck before the zinc was separated.
Format:
Image
John F. Mignone, Jr., and Clyde Spurr installing a motor in an Eimco Finlay Loader. The loader will be repaired, cleaned and returned to the mine in first class operating condition, with the least possible loss of time from service.
Format:
Image
Loading mining timbers on a timber truck at the bottom of the main shaft at the Gilman Mine. Steve Rich is using an air hoist to move the load. Timbers were stored at the surface yard and then moved to the main shaft by fork lift for loading.
Format:
Image
Loading mining timbers from the surface at the main shaft of the Gilman Mine. The timbers were inverted to fit the cage in the shaft.
Format:
Image
Steve Rich loading mining timber onto a timber truck at the 16 level in the Gilman mine. After the timbers were removed from the shaft, they were turned horizontally for loading. Safety signs at left.
Format:
Image
Lee Ferris lubricating a bearing on the main cage at the Gilman Mine.
The safety manager was a very important part of the mining team. Safety was stressed constantly through regular meetings and signs placed throughout the mine.