Showing
61 - 80
of 121
, query time: 0.01s
61) Machine Shop
Format:
Image
Bob Enzenroth in the machine shop at the Gilman Mine repairing and overhauling a jackhammer.
Format:
Image
Main Street in Gilman during a winter in the early 1930's. The Model A at right has a license plate number 44-552. Model As were first produced in 1927.
63) Main cage
Format:
Image
Inspection and maintenance on the main cage at the Gilman Mine. Safety clamps are evident in the center of the shaft on the cage.
Format:
Image
The main shaft at the Gilman Mine with Mayo Lanning, mine chief, inspecting.
Format:
Image
O.A. McClain, foreman (at left), and John Mignone standing beside a completely rebuilt mine car.
66) Mine stope
Format:
Image
Mine stope showing the reinforcing timbers used. On the left side of the picture is a thermometer used to monitor temperatures.
67) Mitchell Sets
Format:
Image
Wood framing used to support walls and overhead in the mine at Gilman, known as "Mitchell Sets"
Format:
Image
Moving mining timber at the surface level near the main shaft at Gilman. Timber was stored outside until needed in the mine and loaded vertically into the main cage for unloading on 16 level.
Format:
Image
Section of the zinc dryer being fitted into place at Belden. Chains and blocks are used to move the equipment into the building.
70) Mucking machine
Format:
Image
Air operated mucking machine. The scoop goes over the mucking machine and empties the ore into the car behind. Miners also used these cars to move mining timbers throughout the mine.
71) Mucking machine
Format:
Image
Mucking machine picking up a load of ore at Gilman. The machine ran on rails and pulled ore cars behind for loading.
72) Mucking machine
Format:
Image
Air operated mucking machine preparing to load material. The scoop would go over the mucking machine and empty the ore into the cart behind. Operator controls were at the left side of the machine.
73) Mucking machine
Format:
Image
A compressed air-driven mucking machine at Gilman. The bucket has just been dumped into the ore car behind and is preparing to recover and pick up another load of ore.
Format:
Image
The New Jersey Zinc Company office in Gilman, Colorado. The cinder block portion, which was the newer portion of the office, was constructed in approximately 1953. [license plate 1953]
Format:
Image
Staff meeting at the Gilman Mine. Left to right, Harold Steinmeyer, Gordon Craig, Frank Maloit, Bob Radabaugh, Dick Sayers, Bill Jude.
Format:
Image
Staff meeting at the Gilman office of New Jersey Zinc Company. Left to right, Harold Steinmeyer, Gordon Craig (Mill Superintendent), Frank Maloit, Bill Jude, Bob Radabaugh, Dick Sayers
77) O. A. McClain
Format:
Image
O.A. McClain standing near equipment manufactured in Chicago and New York for the Gilman Mine.
Format:
Image
O.A. McClain and Jesse Belt shearing bar steel for timber truck reinforcement. The shearing machine saved many tedious hours of sawing and cutting bar steel.
Format:
Image
Inside the office at the Gilman Mine. Furnishings were designed to be functional and not designed for comfort. The ever present "swing light," seen on the right, was used on the
drafting and engineering tables.
Format:
Image
The 1916 election was also a presidential one where we elected Woodrow Wilson. Here are the election results for all of Eagle County, including Ruedi, Wolcott, "Lakes", Red Cliff, Gypsum, Burns, Eagle, and others. The election also includes several towns that no longer exist: Gilman, Pando, Sheephorn, and Fulford.
In Eagle County, Wilson was easily their president-elect.