Gilman Mine, Gilman, Colorado
Showing
41 - 60
of 89
, query time: 0.01s
Format:
Image
Lee Ferris lubricating a bearing on the main cage at the Gilman Mine.
The safety manager was a very important part of the mining team. Safety was stressed constantly through regular meetings and signs placed throughout the mine.
Format:
Image
Quinton Sagrillo or Frank Jones or Mike Chockie lubricating part of the zinc dryer at Belden.
43) Machine Shop
Format:
Image
Bob Enzenroth in the machine shop at the Gilman Mine repairing and overhauling a jackhammer.
Format:
Image
The main shaft at the Gilman Mine with Mayo Lanning, mine chief, inspecting.
45) Mine stope
Format:
Image
Mine stope showing the reinforcing timbers used. On the left side of the picture is a thermometer used to monitor temperatures.
Format:
Image
Moving a dryer section into place by blocking and chaining. Small sections pf pipe were also used to move the dryer.
Format:
Image
Section of the zinc dryer being fitted into place at Belden. Chains and blocks are used to move the equipment into the building.
48) Mucking machine
Format:
Image
Air operated mucking machine. The scoop goes over the mucking machine and empties the ore into the car behind. Miners also used these cars to move mining timbers throughout the mine.
49) Mucking machine
Format:
Image
Mucking machine picking up a load of ore at Gilman. The machine ran on rails and pulled ore cars behind for loading.
50) Mucking machine
Format:
Image
Air operated mucking machine preparing to load material. The scoop would go over the mucking machine and empty the ore into the cart behind. Operator controls were at the left side of the machine.
51) Mucking machine
Format:
Image
A compressed air-driven mucking machine at Gilman. The bucket has just been dumped into the ore car behind and is preparing to recover and pick up another load of ore.
Format:
Image
New dryer being put in place at Belden. Drying fins are seen in the inside of the dryer.
53) New zinc dryer
Format:
Image
Quinton Sagrillo performing maintenance on the new zinc dryer. Sagrillo was a dryer operator for New Jersey Zinc.
Sagrillo served in World War I and then lived in Telluride and Denver. He and his wife Rose then managed the State Agricultural Farm Experiment Station at Avon for four years. He accepted employment with New Jersey Zinc, working there for 20 years before retiring in 1959.
54) O. A. McClain
Format:
Image
O.A. McClain standing near equipment manufactured in Chicago and New York for the Gilman Mine.
Format:
Image
O.A. McClain and Jesse Belt shearing bar steel for timber truck reinforcement. The shearing machine saved many tedious hours of sawing and cutting bar steel.
56) Ore conveyor
Format:
Image
A mine ore conveyor being loaded from another level down a chute that had chains for filtering out large rocks. A miner stood near the conveyor and picked out pieces of wood and other debris.
Format:
Image
A mine conveyor used for transporting the zinc ore from level to level and to the crusher in the mine. Conveyors were used extensively in the mine. [related to photo 2007.008.067]
Format:
Image
Dick Sayers (left) and John Skinner adjusting controls at the pump station on 20 level at the mine in Gilman.
59) Rebuilt mine car
Format:
Image
O.A. McClain and Roy Long standing beside a completely rebuilt mine car at the Gilman Mine. An "eye" is seen with chains attached at the bottom of the cart. The eye was used to hook the mine cars together in a series of small trains for hauling ore.
60) Repair area
Format:
Image
From far left: Chuck Colby, Berniece Chadwick and Davy Burnett. Jean Flaherty is at far right.
