Gilman Mine, Gilman, Colorado
Showing
41 - 60
of 318
, query time: 0.01s
41) Bonnie Hastings
Format:
Image
Bonnie Hastings in the office at the Gilman Mine. Note the large office equipment, typewriter and calculator, that were used .
Format:
Image
This is the bottom of 18 level where water has been allowed to infiltrate the lower levels beneath it.
Format:
Image
Returning to Gilman for a tour on July 26, 1997. Buster Beck and Alan Albert.
44) Caddy's house
Format:
Image
Returning to Gilman for a tour on July 26, 1997. Caddy's house with Marie Belina, two unidentified reporters from the Vail Trail, Bill Belina and Charlie Jude. The Belina's father worked at Gilman and they lived either in Caddy's or Maloit's home.
45) Cap Lamp Room
Format:
Image
From left, Bill Burnett, Hawkeye (Gordon) Flaherty, and Ella Burnett are standing in front of cap lamp units at 16 level in the Gilman mine. Alberta Limatta is at far right.
The shaft house had a 2 cage lift system, taking miners between levels. It could work with one cage going up and the other down, or with just one isolated cage moving. Cap lamps were put on before going into the mine and returned upon coming out.
46) Cap lamp room
Format:
Image
Berniece Chadwick, Alberta Limatta, and Ella Burnett with Hawkeye and Jean Flaherty behind them in the cap lamp room. The belts visible on Berniece and Ella hold a battery pack on the back with a power cord attaching to the lamp. Each lamp had 2 filaments so that if one burned out, the power could be switched to the second.
Format:
Image
Carl Garner reconstructing a mine hoist used for moving ore and supplies in the mine.
Format:
Image
Casts for pouring bearings in the mill. The idea of the machine shop and mill was to make the Gilman Mine as self sufficient as possible in terms of repair and renovation of equipment.
49) Charlie Francis
Format:
Image
Charlie Francis (center), sent from the New York office during union negiotiations, at Maloit Park.
50) Chemical storage
Format:
Image
Lime, soda ash and copper sulfate (used in the zinc ore processing) stored beneath the mill at Gilman. Tracks used by timber trucks and ore cars run down the center of the picture. [Same as 2007.008.123]
Format:
Image
Staging area in the mill at Gilman for the chemicals used to process the mined ore. The fork lift was used to lift pallets of the chemicals for use in the mixing machines. [Similar to 2007.008.072]
Format:
Image
Ronnie Jenkins (hands in pockets) stands behind a chopping Eddie Duffy, while Tony Karwacki holds a log in place. Others are unidentified. The wood pile is at the fireplace in the background.
Format:
Image
Bill May adjusting the controls on the compressor at Belden; Harold Steinmeyer supervising.
Format:
Image
Harold Steinmeyer and Bill May in the compressor room at Belden. Compressor equipment in the background is Ingersoll-Rand. During the spring and summer months, power for the compressors was provided by using Pelton Wheels (turbines) situated in nearby Fall Creek to generate electricity.
Format:
Image
Harold Steinmeyer (left) and Bill May in the compressor room at Belden. Prior to the electrical power plant at Gilman, much of the electricity for the mine (compressors) was supplied by the use of Pelton wheels (turbines) powered by the water from Fall Creek at Belden.
Format:
Image
Installing new transformers at Gilman. The tanks at the back of the unit are for cooling purposes.
Format:
Image
From left, Frank Maloit (head down), Eddie Duffy and George Gillian conversing at the New Jersey Zinc picnic at Maloit Park. Automobiles are parked in the background.
Format:
Image
From left, Frank Maloit (head down), Eddie Duffy and George Gillian conversing at the New Jersey Zinc picnic at Maloit Park. Automobiles are parked in the background.
Format:
Image
Crane at Gilman power plant moving transformers. The building in the left background housed the post office, mercantile, and grocery store.
Format:
Image
Cutting mining timber with a horizontal blade at the Warren Sawmill in Red Cliff. Extra blades are stored on the cutting arm to the right.
