Mine equipment
Showing
1 - 20
of 46
, query time: 0.02s
Format:
Image
"At the Copper King mine in 1910: Fred Norquist, John LaForce, Emmett Quinlan, Warren Gibson and Frank Groh. For some unknown reason, the various individuals and companies who had operated the mine up to 1950 never bothered to have it patented." -- McCoy Memoirs p. 12
[Title supplied from catalog prepared by the Eagle County Historical Society.]
Format:
Image
Belden as seen from Gilman. On the left are the loading tippel, steam room and dryer. Loading tippel is extended over the railroad cars to be filled with ore. A surface tram carrying ore ready for loading is visible behind the loading tippel.
Format:
Image
Belden as seen from Gilman. On the left are the loading tippel, steam room and dryer. Loading tippel is extended over the railroad cars to be filled with ore. A surface tram carrying ore ready for loading is visible behind the loading tippel.
Format:
Image
Lime, soda ash and copper sulfate (used in the zinc ore processing) stored beneath the mill at Gilman. Tracks used by timber trucks and ore cars run down the center of the picture. [Same as 2007.008.123]
Format:
Image
Staging area in the mill at Gilman for the chemicals used to process the mined ore. The fork lift was used to lift pallets of the chemicals for use in the mixing machines. [Similar to 2007.008.072]
Format:
Image
The cyanide injecting machine inside the mill at Gilman. Cyanide was used to clean the ore for processing. A pressure gauge is seen at the top of the injectors.
Format:
Image
Ed Koch starting the repair and reconditioning of a rocker dump mine car. This mine car has become unserviceable since the bottom and end are worn through. The car will receive new steel section plates and be completely reconditioned.
Format:
Image
Ed Koch starting the repair and reconditioning of a rocker dump mine car. This mine car has become unserviceable since the bottom and end are worn through. The car will receive new steel section plates and be completely reconditioned.
11) Flotation area
Format:
Image
Floation area for the zinc ore at Gilman. Flotation tables were used to seperate the zinc and lead from the waste in the mining process. Further processing separated the lead and the zinc.
12) Flotation area
Format:
Image
Floation area for the zinc ore at Gilman. Flotation tables were used to seperate the zinc and lead from the waste in the mining process. Further processing separated the lead and the zinc.
Format:
Image
Flotation area for the zinc ore. Water valves are shown at the bottom of the table.
Format:
Image
Flotation stations in the zinc section of the mill at Gilman. The flotation stations were part of the process of refining the zinc ore.
Format:
Image
Closeup of the flume used to dump "muck' onto the conveyor. This conveyor carried the ore to a series of crushing machines. Conveyors were used extensively in the mine. [related to photo 2007.008.090]
Format:
Image
Fork lift loading soda ash onto a platform for use in the soda ash machine. The fork lift was battery operated.
Format:
Image
Lead flotation cell separating the lead from the crushed rock. Lead and gold were removed from the muck before the zinc was separated.
Format:
Image
Quinton Sagrillo or Frank Jones or Mike Chockie lubricating part of the zinc dryer at Belden.
19) Mill
Format:
Image
The mill building at Holy Cross City.
Gold Park and Holy Cross City were the major mining camps in the Holy Cross Mining District.
"Apparently, there were two mills at Holy Cross City. The first, located just below the town, on the west side of the road, was called simply the Holy Cross Mill. It was owned by the Gold Park Mining and Milling Co. which also maintained a similar installation down below. ... Both mills were connected by a direct 2...
Format:
Image
Gold Park and Holy Cross City were the major mining camps in the Holy Cross Mining District. Man with shovel at center foreground.
"Apparently, there were two mills at Holy Cross City. The first, located just below the town, on the west side of the road, was called simply the Holy Cross Mill. It was owned by the Gold Park Mining and Milling Co. which also maintained a similar installation down below. ... Both mills were connected by a direct 2...
