Belden, Colorado
Showing
21 - 40
of 81
, query time: 0.01s
Format:
Image
This is the bottom of 18 level where water has been allowed to infiltrate the lower levels beneath it.
27) Cap Lamp Room
Format:
Image
From left, Bill Burnett, Hawkeye (Gordon) Flaherty, and Ella Burnett are standing in front of cap lamp units at 16 level in the Gilman mine. Alberta Limatta is at far right.
The shaft house had a 2 cage lift system, taking miners between levels. It could work with one cage going up and the other down, or with just one isolated cage moving. Cap lamps were put on before going into the mine and returned upon coming out.
28) Cap lamp room
Format:
Image
Berniece Chadwick, Alberta Limatta, and Ella Burnett with Hawkeye and Jean Flaherty behind them in the cap lamp room. The belts visible on Berniece and Ella hold a battery pack on the back with a power cord attaching to the lamp. Each lamp had 2 filaments so that if one burned out, the power could be switched to the second.
Format:
Image
Bill May adjusting the controls on the compressor at Belden; Harold Steinmeyer supervising.
Format:
Image
Harold Steinmeyer and Bill May in the compressor room at Belden. Compressor equipment in the background is Ingersoll-Rand. During the spring and summer months, power for the compressors was provided by using Pelton Wheels (turbines) situated in nearby Fall Creek to generate electricity.
Format:
Image
Harold Steinmeyer (left) and Bill May in the compressor room at Belden. Prior to the electrical power plant at Gilman, much of the electricity for the mine (compressors) was supplied by the use of Pelton wheels (turbines) powered by the water from Fall Creek at Belden.
32) Derailment
Format:
Image
Rail cars knocked off the tracks in the winter, circa 1951-52 at Belden. Other cars are lined up in the background awating loading. The dryer is the large building behind the railroad cars.
33) Derailment
Format:
Image
Walkway to the compressor building from the dryer building. In the background are wrecked
railroad cars. The Eagle River runs beneath the bridge, although hidden by ice and snow.
34) Derailment
Format:
Image
Railroad engine of the Rio Grande Railroad at Belden in the winter. Wrecked railcars can be seen in the snow to the right.
Format:
Image
Derailed railroad cars at Belden in the winter, circa 1951. The Eagle River is in the center of the photo.
Format:
Image
Drills and lathes in the repair area. Welders and machinists were employed by New Jersey Zinc to maintain and recycle equipment. During the 1950s, there were three shifts working each day to maintain production levels.
Format:
Image
Looking down at the Eagle River in Eagle Canyon, at a portion of the railroad tracks at Belden.
Format:
Image
Hap Fletcher pushing snow with a dozer after a snow slide near Belden.
Format:
Image
Aerial photograph taken by Mayo Lanning on February 3, 1998. Gilman is at the top of the photo with the tram from Gilman Mine going down to Belden at the bottom, next to the Eagle River.
Format:
Image
Verso of 2010.009.005, showing photographer's notes for the photo.
