Showing 1 - 20 of 33 , query time: 0.01s
Cover Image
Format:
Image
Dick Sayers (left) and John Skinner discussing the adjustments to equipment. A good view of the headlamp attachment to the battery pack carried on one's belt.
Cover Image
Format:
Image
Dick Sayers (left) and John Skinner adjusting the valves on equipment.
Cover Image
Format:
Image
Dick Sayers (left) and John Skinner adjusting the valves on equipment.
Cover Image
4) Belden
Format:
Image
A close-up of facilities at Belden, some abandoned. Across the Eagle River, the power plant is visible at left.
Cover Image
5) Belden
Format:
Image
Facilities at Belden, some abandoned. Mine buildings are at right, midfield. The Eagle River is at the right and railroad tracks are at the bottom
Cover Image
6) Belden
Format:
Image
Facilities at Belden, some abandoned. Gilman is visible at the top of the cliff. Mine buildings are at right, midfield.
Cover Image
7) Belden
Format:
Image
A close-up of facilities at Belden, some abandoned.
Cover Image
8) Belden
Format:
Image
The Belden processing and shipping area for the ore that was mined at Gilman Mine. The loading tippel is the first building on the left (white); next is the steam room and then the dryer. Box cars are lined up on the tracks by the loading tippel. The box cars at the center of the photo are underneath the Ben Butler Mine.
Cover Image
Format:
Image
Blasting caps and cord station.
Cover Image
Format:
Image
From left, Bill Burnett, Hawkeye (Gordon) Flaherty, and Ella Burnett are standing in front of cap lamp units at 16 level in the Gilman mine. Alberta Limatta is at far right. The shaft house had a 2 cage lift system, taking miners between levels. It could work with one cage going up and the other down, or with just one isolated cage moving. Cap lamps were put on before going into the mine and returned upon coming out.
Cover Image
Format:
Image
Berniece Chadwick, Alberta Limatta, and Ella Burnett with Hawkeye and Jean Flaherty behind them in the cap lamp room. The belts visible on Berniece and Ella hold a battery pack on the back with a power cord attaching to the lamp. Each lamp had 2 filaments so that if one burned out, the power could be switched to the second.
Cover Image
Format:
Image
Walkway to the compressor building from the dryer building. In the background are wrecked railroad cars. The Eagle River runs beneath the bridge, although hidden by ice and snow.
Cover Image
Format:
Image
Dick Sayers (left) and John Skinner, examining ore in the ore cars. Both men are wearing headlamps.
Cover Image
Format:
Image
Dick Sayers (left) and John Skinner, closely examining ore in the ore cars. Both men are wearing headlamps.
Cover Image
Format:
Image
Verso: "Don headed for Evening Star Mine at Gilman" Behind Don [wearing his head lamp] is a stack of mining timbers.
Cover Image
Format:
Image
Team installing a new dryer at the New Jersey Zinc Co. facilities at Belden. From Left: Don Ginther, Lynn Walker, [unknown], Homer Sultzer, Buck Hickman, Forrest Witthauer. [Courtesy of Theodore Beck]
Cover Image
Format:
Image
Machinery seen through railings.
Cover Image
18) Mantrip
Format:
Image
Loading up for transportation to lower levels in the mine. The 16-10 incline goes down to the 18 level (at one time it went all the way to the 24 level). Transporting people was called a mantrip. In the front seat are Terry Pierson, Ella and Pete Burnett. Victor Pierson is standing at left in the yellow helmet.
Cover Image
Format:
Image
O.A. McClain, foreman (at left), and John Mignone standing beside a completely rebuilt mine car.
Cover Image
Format:
Image
Using a level to make sure the mine tailings flume is canted to the right angle. Tailings were piped from Gilman as a slurry and, as the slurry dried, it became the same consistency as a fine sand.