Showing
81 - 100
of 333
, query time: 0.01s
Format:
Image
Ed Koch starting the repair and reconditioning of a rocker dump mine car. This mine car has become unserviceable since the bottom and end are worn through. The car will receive new steel section plates and be completely reconditioned.
Format:
Image
Ed Koch starting the repair and reconditioning of a rocker dump mine car. This mine car has become unserviceable since the bottom and end are worn through. The car will receive new steel section plates and be completely reconditioned.
Format:
Image
Ed Miller (chef at the staff house in Gilman until his retirement in 1965) checking the coffee progress at Maloit Park. In the right background is a Willis Jeep with a power winch attachment which was useful during the many hunting trips enjoyed by most of the employees of New Jersey Zinc, Gilman.
Format:
Image
Electrical transformers, prior to unloading at Gilman, on a Weicker transfer and storage truck.
85) Elmer Ottens
Format:
Image
Elmer Ottens behind the wheel of his RV, visiting friends in Boulder, Colorado. Elmer was an electrician with the New Jersey Zinc Co., first in New Jersy and then at Gilman, Colorado. He retired in 1988. He was married to Virginia Lewis, daughter of Pearl Henderson, of Red Cliff.
Format:
Image
Emmet Flaherty preparing to pre-heat two blank pieces of hollow drill steel. In the background is an automatic oil-fired forge which will bring these blanks to an exact temperature for forging. From the hollow drill blanks, finished pieces of lugged steel are formed for use in rock drills.
87) Examining ore
Format:
Image
Dick Sayers (left) and John Skinner, examining ore in the ore cars. Both men are wearing headlamps.
88) Examining ore
Format:
Image
Dick Sayers (left) and John Skinner, closely examining ore in the ore cars. Both men are wearing headlamps.
Format:
Image
"Five o'clock at Gilman, Colorado." The company town of New Jersey Zinc in the afternoon sunlight. The main shaft entrance, the first building upon entering the town, is at the center of the photo; stacked mine timbers are directly to the right of the main shaft.
Format:
Image
Hap Fletcher pushing snow with a dozer after a snow slide near Belden.
93) Flotation area
Format:
Image
Floation area for the zinc ore at Gilman. Flotation tables were used to seperate the zinc and lead from the waste in the mining process. Further processing separated the lead and the zinc.
94) Flotation area
Format:
Image
Floation area for the zinc ore at Gilman. Flotation tables were used to seperate the zinc and lead from the waste in the mining process. Further processing separated the lead and the zinc.
Format:
Image
Flotation area for the zinc ore. Water valves are shown at the bottom of the table.
Format:
Image
Flotation stations in the zinc section of the mill at Gilman. The flotation stations were part of the process of refining the zinc ore.
Format:
Image
Closeup of the flume used to dump "muck' onto the conveyor. This conveyor carried the ore to a series of crushing machines. Conveyors were used extensively in the mine. [related to photo 2007.008.090]
Format:
Image
Ida Doyle (far left), Mary Duffy and Ed Duffy at Maloit Park........others are unidentified.
Format:
Image
Fork lift loading soda ash onto a platform for use in the soda ash machine. The fork lift was battery operated.