Showing
1 - 13
of 13
, query time: 0.01s
Format:
Image
Using a level to make sure the mine tailings flume is canted to the right angle. Tailings were piped from Gilman as a slurry and, as the slurry dried, it became the same consistency as a fine sand.
Format:
Image
Dick Sayers (left) and John Skinner, examining ore in the ore cars. Both men are wearing headlamps.
Format:
Image
Using a lift to move drums of chemicals in the Gilman mine.
Format:
Image
Dick Sayers (left) and John Skinner discussing the adjustments to equipment. A good view of the headlamp attachment to the battery pack carried on one's belt.
Format:
Image
Ore cars full of ore lined up on the rails, waiting to go to the crushers.
Format:
Image
Dick Sayers (left) and John Skinner adjusting the valves on equipment.
Format:
Image
Dick Sayers (left) and John Skinner adjusting the valves on equipment.
12) Examining ore
Format:
Image
Dick Sayers (left) and John Skinner, closely examining ore in the ore cars. Both men are wearing headlamps.
13) Rebuilt mine car
Format:
Image
O.A. McClain and Roy Long standing beside a completely rebuilt mine car at the Gilman Mine. An "eye" is seen with chains attached at the bottom of the cart. The eye was used to hook the mine cars together in a series of small trains for hauling ore.