Showing
61 - 80
of 118
, query time: 0.02s
Format:
Image
A ground squirrel takes a lunch break on a wall near the compressor house in Belden. It seems that everyone had to work no matter what they were.
Format:
Image
Ramond M. "Hap" Fletcher plowing snow after a slide at Belden in the winter. Fletcher was a heavy equipment operator for the New Jersey Zinc Co. The vehicle was tracked for better performance in the heavy snow in the Eagle Canyon near Belden.
Format:
Image
Ramond M. "Hap" Fletcher plowing snow after a slide at Belden in the winter. Fletcher was a heavy equipment operator for the New Jersey Zinc Co. The vehicle was tracked for better performance in the heavy snow in the Eagle Canyon near Belden.
Format:
Image
Team installing a new dryer at the New Jersey Zinc Co. facilities at Belden.
From Left: Don Ginther, Lynn Walker, [unknown], Homer Sultzer, Buck Hickman, Forrest Witthauer. [Courtesy of Theodore Beck]
65) Iron Mask Mill
Format:
Image
The Iron Mask Mill at Belden, at the bottom of the Eagle River Canyon. The Eagle River is in the foreground; Gilman is at the top of the canyon.
66) Iron Mask Mill
Format:
Image
c.1890: Iron Mask Mill, Belden, Colorado. This old mill is torn down and a new one built in solid granite. Ore transport system, railcar ("Wabash" on side) and tracks visible. Snow on ground. This photograph is a postcard with a 1 cent stamp postmarked for 1911.
[Title supplied from catalog prepared by the Eagle County Historical Society.]
Format:
Image
Documenting the landslide onto the D&RG tracks in Eagle River Canyon. The numbers on the photo correspond to the descriptions below.
"1. Loading tipple; 2. Service tunnel to mill stope. Note how completely the slide buried it" [written by Tom Knight]
Format:
Image
Documenting the landslide onto the D&RG tracks in Eagle River Canyon. The numbers on the photo correspond to the descriptions below. The old mill is at far right.
Verso: "1. New House Station on tram; 2. Eagle River; 3. Slide on D&RG; 4. An old mill, note the cribbing underneath the building" [written by Tom Knight]
Format:
Image
Documenting the landslide onto the D&RG tracks in Eagle River Canyon. The numbers on the photo correspond to the descriptions below.
Verso: "1. Compressor house; 2. Tram landing; 3. New House tunnel station on tram; I am working on a level with the New House Tunnel, but about ½ miles in the Mtn. Notice how steep the tram is; it's steeper yet before it reaches Gilman." [written by Tom Knight]
Format:
Image
The lathes were for working steel. They could straighten bent drill steel, put new ends on the rods and send them back for reuse. The Gilman shop reused as much equipment and supplies as was possible.
73) Loading tipple
Format:
Image
The loading tipple is at far left where products would be transferred to railroad cars for shipment. The "Bull Gang" managed loading and maintenance in the Eagle River canyon. Robert E. Riggle was Bull Gang chief at one point.
The stairway at center goes into a mine entrance at about the 17 level. There are 80 feet between levels in the Gilman mine.
Format:
Image
Verso: "D&RG RR train passing through Belden in the Eagle Canyon 1930s"
Format:
Image
View from the surface tram looking down toward Belden.
Format:
Image
Looking south along the railroad tracks at Belden towards the Belden mill. Destroyed cribbing on the left and debris on the tracks in the background.
Format:
Image
Quinton Sagrillo or Frank Jones or Mike Chockie lubricating part of the zinc dryer at Belden.
79) MacDonald Knight
Format:
Image
Caption: "Don at Eagle Canyon at Belden, prospecting"
MacDonald Knight is standing next to the railroad tracks and in front of some cribbing at Belden in the Eagle River Canyon.