Mines
Showing
61 - 80
of 354
, query time: 0.02s
Format:
Image
Bill May adjusting the controls on the compressor at Belden; Harold Steinmeyer supervising.
Format:
Image
Harold Steinmeyer and Bill May in the compressor room at Belden. Compressor equipment in the background is Ingersoll-Rand. During the spring and summer months, power for the compressors was provided by using Pelton Wheels (turbines) situated in nearby Fall Creek to generate electricity.
Format:
Image
Harold Steinmeyer (left) and Bill May in the compressor room at Belden. Prior to the electrical power plant at Gilman, much of the electricity for the mine (compressors) was supplied by the use of Pelton wheels (turbines) powered by the water from Fall Creek at Belden.
Format:
Image
Installing new transformers at Gilman. The tanks at the back of the unit are for cooling purposes.
Format:
Image
A contour sketch map of the Eagle Vanadium Company's consolidated mines, located along Brush Creek. This map was created in August of 1915. Charles G. Walker, a mining engineer and surveyor, may have drawn the map. According to Alda Borah, Charles "Chas" G. Walker was in charge of surveying all the mines on Salt and Brush Creek.
Format:
Image
Crane at Gilman power plant moving transformers. The building in the left background housed the post office, mercantile, and grocery store.
Format:
Image
Cutting mining timber with a horizontal blade at the Warren Sawmill in Red Cliff. Extra blades are stored on the cutting arm to the right.
Format:
Image
The cyanide injecting machine inside the mill at Gilman. Cyanide was used to clean the ore for processing. A pressure gauge is seen at the top of the injectors.
69) Cyanide mixing
Format:
Image
Cyanide mixing machine in the mine at Gilman. Cyanide was shipped to the mine in 50 gallon drums and required the use of rubber gloves in handling.
Format:
Image
"D. & R.G. Railroad" - caption from Edwards School Scrapbook, page 16. The scrapbook was created as a youth citizens' league project between 1954-1955.
The railroad would haul zinc out of the mines at Gilman for several decades. Three buildings are visible, including one perched on the mountainside. At far right, a sign says "Eagle Mines of the Empire Zinc Co". A tailings pipe appears to be dumping into the Eagle River (midground). The town of...
71) Derailment
Format:
Image
Rail cars knocked off the tracks in the winter, circa 1951-52 at Belden. Other cars are lined up in the background awating loading. The dryer is the large building behind the railroad cars.
72) Derailment
Format:
Image
Walkway to the compressor building from the dryer building. In the background are wrecked
railroad cars. The Eagle River runs beneath the bridge, although hidden by ice and snow.
73) Derailment
Format:
Image
Railroad engine of the Rio Grande Railroad at Belden in the winter. Wrecked railcars can be seen in the snow to the right.
Format:
Image
Derailed railroad cars at Belden in the winter, circa 1951. The Eagle River is in the center of the photo.
Format:
Image
Dick Sayers (l) and John Skinner (r) at the pumping station on 20 level at Gilman.
"Water for the mine came directly from the Eagle River from the pump house, which was just across the ramp coming down the mill incline. About 50 tons of ore per hour went through the mill during each eight-hour shift." Eagle River Valley, p.38
76) Dismant Brothers
Format:
Image
“Dismant Brothers were miners. Robert or Voss helped open the Iron Mask- the big mine in Gilman.”
The Dismant family and Robert Vossburg sit on a rock holding their fishing poles. The faint numbers on the photo correspond to these names, from left to right: 1) John Merritt “Merritt” Dismant 2) John Dismant (son of John Merritt) 3) Merritt V. Dismant (son of John Merritt) 4) Robert Vosburg “Voss”, John Merritt’s brother.
Format:
Image
Dorothy Hughes when she was five years old, standing on a platform at the Belden mill (below the town of Gilman). Mr. Spear, team tender, is standing on the right. Tram tracks are above Spear's head. A mudslide came down the hill and blocked the railway and river. The Hughes family lived at Belden from 1919 to 1922.
78) Drilling
Format:
Image
Miner using a compressed air rock drill at the Gilman Mine. A battery operated miner's light is attached to his helmet, with the cord running to the light.
79) Drilling
Format:
Image
Drilling prior to adding dynamite to blast a section for mining at Gilman. Protective clothing was worn to keep the driller from being injured by debris, but we see no eye safety wear.
Format:
Image
Drills and lathes in the repair area. Welders and machinists were employed by New Jersey Zinc to maintain and recycle equipment. During the 1950s, there were three shifts working each day to maintain production levels.
